| ▼ arch | |
| ► cpu | |
| ► arm | |
| ► common | |
| ► SD-card | |
| cfs-sdcard.c | |
| config.h | |
| efs-sdcard.h | |
| efsl_spi.h | |
| sdcard.h | |
| ► usb | |
| ► cdc-acm | |
| cdc-acm-descriptors.c | |
| cdc-acm.c | |
| cdc-acm.h | |
| cdc.h | |
| ► msc | |
| msc-descriptors.c | |
| rbc_const.h | |
| rbc_struct.h | |
| scsi_command.h | |
| scsi_sense.h | |
| scsi_struct.h | |
| spc2_const.h | |
| spc2_struct.h | |
| usb-msc-bulk.c | |
| usb-msc-bulk.h | |
| usb-rbc.c | |
| descriptors.h | |
| string-descriptors.h | |
| usb-api.h | |
| usb-arch.h | |
| usb-core.c | |
| usb-core.h | |
| usb.h | |
| ► cortex-m | |
| ► cm3 | |
| cm3-def.h | Compiler and data type definitions for all CM3-based CPUs |
| ► cm4 | |
| cm4-def.h | Compiler and data type definitions for all CM4-based CPUs |
| ► CMSIS | |
| cmsis_armcc.h | CMSIS Cortex-M Core Function/Instruction Header File |
| cmsis_armcc_V6.h | CMSIS Cortex-M Core Function/Instruction Header File |
| cmsis_gcc.h | CMSIS Cortex-M Core Function/Instruction Header File |
| core_cm0.h | CMSIS Cortex-M0 Core Peripheral Access Layer Header File |
| core_cm0plus.h | CMSIS Cortex-M0+ Core Peripheral Access Layer Header File |
| core_cm3.h | CMSIS Cortex-M3 Core Peripheral Access Layer Header File |
| core_cm4.h | CMSIS Cortex-M4 Core Peripheral Access Layer Header File |
| core_cm7.h | CMSIS Cortex-M7 Core Peripheral Access Layer Header File |
| core_cmFunc.h | CMSIS Cortex-M Core Function Access Header File |
| core_cmInstr.h | CMSIS Cortex-M Core Instruction Access Header File |
| core_cmSimd.h | CMSIS Cortex-M SIMD Header File |
| core_sc000.h | CMSIS SC000 Core Peripheral Access Layer Header File |
| core_sc300.h | CMSIS SC300 Core Peripheral Access Layer Header File |
| memory-barrier-cortex.h | |
| mutex-cortex.h | |
| arm-def.h | Compiler and data type definitions for all ARM-based CPUs |
| ► cc2538 | |
| ► dev | |
| adc.c | Implementation of the cc2538 ADC driver |
| adc.h | Header file for the cc2538 ADC driver |
| aes.c | Implementation of the cc2538 AES driver |
| aes.h | Header file for the cc2538 AES driver |
| ana-regs.h | Header with declarations of ANA_REGS module registers |
| bignum-driver.c | Implementation of the cc2538 BigNum driver |
| bignum-driver.h | Header file for the cc2538 BigNum driver |
| cbc-mac.c | Implementation of the cc2538 AES-CBC-MAC driver |
| cbc-mac.h | Header file for the cc2538 AES-CBC-MAC driver |
| cbc.c | Implementation of the cc2538 AES-CBC driver |
| cbc.h | Header file for the cc2538 AES-CBC driver |
| cc2538-aes-128.c | Implementation of the AES-128 driver for the CC2538 SoC |
| cc2538-aes-128.h | Header file of the AES-128 driver for the CC2538 SoC |
| cc2538-ccm-star.c | Implementation of the AES-CCM* driver for the CC2538 SoC |
| cc2538-ccm-star.h | Header file of the AES-CCM* driver for the CC2538 SoC |
| cc2538-dev.h | Header file for the cc2538 devices definitions |
| cc2538-rf.c | Implementation of the cc2538 RF driver |
| cc2538-rf.h | Header file for the cc2538 RF driver |
| cc2538-sensors.h | Generic header usable by all CC2538 sensor drivers |
| cc2538-temp-sensor.c | Driver for the CC2538 On-Chip temperature sensor |
| cc2538-temp-sensor.h | Header file for the CC2538 on-chip temperature Sensor Driver |
| ccm.c | Implementation of the cc2538 AES-CCM driver |
| ccm.h | Header file for the cc2538 AES-CCM driver |
| cctest.h | Header with declarations of CCTEST module registers |
| crypto.c | Implementation of the cc2538 AES/SHA cryptoprocessor driver |
| crypto.h | Header file for the cc2538 AES/SHA cryptoprocessor driver |
| ctr.c | Implementation of the cc2538 AES-CTR driver |
| ctr.h | Header file for the cc2538 AES-CTR driver |
| ecb.c | Implementation of the cc2538 AES-ECB driver |
| ecb.h | Header file for the cc2538 AES-ECB driver |
| ecc-algorithm.c | Implementation of the cc2538 ECC Algorithms |
| ecc-algorithm.h | Header file for the cc2538 ECC Algorithms |
| ecc-curve.c | |
| ecc-curve.h | NIST curves for various key sizes |
| ecc-driver.c | Implementation of the cc2538 ECC driver |
| ecc-driver.h | Header file for the cc2538 ECC driver |
| flash.h | Header file for the flash memory definitions |
| gcm.c | Implementation of the cc2538 AES-GCM driver |
| gcm.h | Header file for the cc2538 AES-GCM driver |
| gpio-hal-arch.c | Implementation file for the CC2538 GPIO HAL functions |
| gpio-hal-arch.h | Header file for the CC2538 GPIO HAL functions |
| gpio.c | Implementation of the cc2538 GPIO controller |
| gpio.h | Header file with register and macro declarations for the cc2538 GPIO module |
| gptimer.h | Header file for the cc2538 General Purpose Timers |
| i2c.c | Implementation file of the I2C Control module |
| i2c.h | Header file with declarations for the I2C Control module |
| ioc.c | Implementation of IOC functions |
| ioc.h | Header file with declarations for the I/O Control module |
| nvic.c | Driver for the cc2538 NVIC All interrupt-related functionality is implemented here |
| nvic.h | Header file for the ARM Nested Vectored Interrupt Controller |
| pka.c | Implementation of the cc2538 PKA engine driver |
| pka.h | Header file for the cc2538 PKA engine driver |
| pwm.c | Driver for the CC2538 PWM |
| pwm.h | Header file for the CC2538 PWM driver |
| random.c | Random number generator routines exploiting the cc2538 hardware capabilities |
| rfcore-ffsm.h | Header with declarations of the RF Core FFSM registers |
| rfcore-sfr.h | Header with declarations of the RF Core SFR registers |
| rfcore-xreg.h | Header with declarations of the RF Core XREGs |
| rfcore.h | Top-level header file for cc2538 RF Core registers |
| rom-util.h | Header file for the cc2538 ROM utility function library driver |
| sha256.c | Implementation of the cc2538 SHA-256 driver |
| sha256.h | Header file for the cc2538 SHA-256 driver |
| smwdthrosc.h | Header file with register declarations and bit masks for the cc2538 Sleep Timer and Watchdog |
| soc-adc.h | Header file with register declarations for the cc2538 ADC and H/W RNG |
| spi-arch-legacy.h | Header file for the cc2538 SPI driver, including macros for the implementation of the low-level SPI primitives such as waiting for the TX FIFO to be ready, inserting into the TX FIFO, etc |
| spi-arch.c | |
| spi-legacy.c | Implementation of the cc2538 SPI peripheral driver |
| ssi.h | Header file for the cc2538 Synchronous Serial Interface |
| sys-ctrl.c | Implementation of the cc2538 System Control driver |
| sys-ctrl.h | Header file for the cc2538 System Control driver |
| uart.c | Implementation of the cc2538 UART driver |
| uart.h | Header file for the cc2538 UART driver |
| udma.c | Implementation of the cc2538 micro-DMA driver |
| udma.h | Header file with register, macro and function declarations for the cc2538 micro-DMA controller module |
| usb-regs.h | Header file with declarations for the cc2538 USB registers |
| vdd3-sensor.c | Driver for the CC2538 VDD3 sensor |
| vdd3-sensor.h | Header file for the CC2538 VDD3 Sensor Driver |
| watchdog.c | Implementation of the cc2538 watchdog driver |
| ► usb | |
| ► common | |
| ► cdc-acm | |
| cdc-acm.c | |
| cdc-acm.h | |
| cdc.h | |
| descriptors.h | |
| string-descriptors.h | |
| usb-api.h | |
| usb-arch.h | |
| usb-core.c | |
| usb-core.h | |
| usb.h | |
| cdc-acm-descriptors.c | CDC-ACM mode USB descriptor for the cc2538 USB controller |
| usb-arch.c | Arch-specific routines for the cc2538 USB controller |
| usb-serial.c | Platform process which implements a UART-like functionality over the cc2538's USB hardware |
| usb-serial.h | Header file for cc2538's UART-like I/O over USB |
| cc2538-conf.h | |
| cc2538-def.h | |
| cc2538_cm3.h | CMSIS Cortex-M3 core peripheral access layer header file for CC2538 |
| cfs-coffee-arch.c | Module for the cc2538 Coffee port |
| cfs-coffee-arch.h | Header file for the cc2538 Coffee port module |
| clock.c | Clock driver implementation for the TI cc2538 |
| cpu.h | Header file with prototypes for interrupt control on the cc2538 Cortex-M3 micro |
| dbg.c | |
| ieee-addr.c | Driver for the cc2538 IEEE addresses |
| ieee-addr.h | Header file with register and macro declarations for the cc2538 IEEE address driver |
| int-master.c | Master interrupt manipulation implementation for the TI CC2538 |
| lpm.c | Implementation of low power modes ofr the cc2538 |
| lpm.h | Header file with register, macro and function declarations for the cc2538 low power module |
| reg.h | Header file with register manipulation macro definitions |
| rtimer-arch.c | Implementation of the arch-specific rtimer functions for the cc2538 |
| rtimer-arch.h | Header file for the cc2538 rtimer driver |
| slip-arch.c | |
| soc.c | Implementation of the cc2538 SoC driver |
| soc.h | Header file with macro and function declarations for the cc2538 SoC |
| startup-gcc.c | Startup code for the cc2538 chip, to be used when building with gcc |
| ► cc26xx-cc13xx | |
| ► dev | |
| adc-sensor.c | Driver for the CC13xx/CC26xx ADC |
| adc-sensor.h | Header file for the CC13xx/CC26xx ADC driver |
| aux-ctrl.c | |
| aux-ctrl.h | Header file for the management of the CC13xx/CC26xx AUX domain |
| batmon-sensor.c | Driver for the CC13xx/CC26xx AON battery monitor |
| batmon-sensor.h | Header file for the CC13xx/CC26xx battery monitor |
| cc26xx-uart.c | Implementation of the CC13xx/CC26xx UART driver |
| cc26xx-uart.h | Header file for the CC13xx/CC26xx UART driver |
| contiki-watchdog.c | Implementation of the CC13xx/CC26xx watchdog driver |
| gpio-hal-arch.c | Implementation file for the CC13xx/CC26xx GPIO HAL functions |
| gpio-hal-arch.h | Header file for the CC13xx/CC26xx GPIO HAL functions |
| gpio-interrupt.c | CC13xx/CC26xx GPIO interrupt ISR |
| oscillators.c | Implementation of CC26xxware oscillator control wrappers |
| oscillators.h | Header file for the CC13xx/CC26xx oscillator control |
| soc-rtc.c | Implementation of the CC13xx/CC26xx AON RTC driver |
| soc-rtc.h | Header file for the CC13xx/CC26xx AON RTC driver |
| soc-trng.c | Implementation of the CC13xx/CC26xx RNG driver |
| soc-trng.h | Header file for the CC13xx/CC26xx TRNG driver |
| spi-arch.c | |
| ► rf-core | |
| ► ble-hal | |
| ble-hal-cc26xx.c | BLE radio hardware abstraction implementation for the TI CC26XX controller |
| ble-hal-cc26xx.h | BLE radio hardware abstraction for the TI CC26XX controller |
| rf-ble-cmd.c | BLE commands for the TI CC26xx BLE radio |
| rf-ble-cmd.h | BLE commands for the TI CC26xx BLE radio |
| ble-cc2650.c | BLE radio for the TI CC26xx platform |
| dot-15-4g.h | Header file with descriptors for the various modes of operation defined in IEEE 802.15.4g |
| ieee-mode.c | Implementation of the CC13xx/CC26xx IEEE mode NETSTACK_RADIO driver |
| prop-mode-tx-power.c | Default TX power settings |
| prop-mode.c | Implementation of the CC13xx prop mode NETSTACK_RADIO driver |
| prop-mode.h | Header file for the CC13xx prop mode NETSTACK_RADIO driver |
| rf-ble.c | Implementation of the CC13xx/CC26xx RF BLE driver |
| rf-ble.h | Header file for the CC13xx/CC26xx BLE driver |
| rf-core.c | Implementation of the CC13xx/CC26xx RF core driver |
| rf-core.h | Header file for the CC13xx/CC26xx RF core driver |
| rf-switch.h | Header file with definitions related to RF switch support |
| smartrf-settings.c | |
| smartrf-settings.h | |
| ble-addr.c | Driver for the retrieval of an BLE address from flash |
| ble-addr.h | Driver for the retrieval of an BLE address from flash |
| cc13x0-cc26x0-cm3.h | CMSIS Cortex-M3 core peripheral access layer header file for CC13xx/CC26xx |
| cc13xx-cc26xx-conf.h | Header with configuration defines common to all CC13xx/CC26xx platforms |
| cc13xx-cc26xx-def.h | |
| ccxxware-conf.h | CCxxware-specific configuration for the cc26xx-cc13xx CPU family |
| clock.c | Software clock implementation for the TI CC13xx/CC26xx |
| dbg.c | |
| fault-handlers.c | |
| ieee-addr.c | Driver for the CC13xx/CC26xx IEEE addresses |
| ieee-addr.h | Header file with register and macro declarations for the cc26xx IEEE address driver |
| int-master.c | Master interrupt manipulation implementation for the TI CC13xx/CC26xx |
| lpm.c | Driver for CC13xx/CC26xx low-power operation |
| lpm.h | Header file for the management of CC13xx/CC26xx low-power operation |
| random.c | This file overrides os/lib/random.c and calls SoC-specific RNG functions |
| rtimer-arch.c | Implementation of the arch-specific rtimer functions for the CC13xx/CC26xx |
| rtimer-arch.h | Header file for the CC13xx/CC26xx rtimer driver |
| slip-arch.c | |
| ti-lib-rom.h | Header file with CC13xxware/CC26xxware ROM API |
| ti-lib.h | Header file with macros which rename TI CC26xxware functions |
| ► msp430 | |
| ► dev | |
| button.h | |
| flash.h | Functions for reading and writing MSP430 flash ROM |
| hwconf.h | |
| lpm.h | |
| uart0-putchar.c | |
| uart0.h | UART0 header file
|
| uart1-putchar.c | |
| uart1.h | A brief description of what this file is. |
| ► f1xxx | |
| clock.c | |
| msp430.c | |
| rtimer-arch.c | MSP430-specific rtimer code
|
| spi-legacy.c | |
| uart1.c | |
| ► f2xxx | |
| msp430.c | |
| spi-legacy.c | |
| uart0.c | |
| uart1.c | |
| ► f5xxx | |
| clock.c | |
| msp430.c | |
| rtimer-arch.c | MSP430-specific rtimer code for MSP430X
|
| spi-legacy.c | |
| uart0.c | |
| uart1.c | |
| button.c | |
| cc2420-arch-sfd.c | |
| cc2420-arch-sfd.h | |
| cc2420-arch.c | |
| cc2520-arch-sfd.c | |
| cc2520-arch-sfd.h | |
| cc2520-arch.c | |
| flash.c | Functions for reading and writing flash ROM |
| int-master.c | Master interrupt manipulation implementation for the MSP430 |
| isr_compat.h | |
| leds-arch.c | |
| lpm.c | |
| minileds.c | |
| msp430-conf.h | |
| msp430-def.h | |
| rom.c | |
| rtimer-arch.h | Header file for the MSP430-specific rtimer code
|
| slip_uart0.c | |
| slip_uart1.c | |
| uip-ipchksum.c | uIP checksum calculation for MSP430
|
| watchdog.c | |
| ► native | |
| ► dev | |
| eeprom.c | |
| gpio-hal-arch.c | |
| ► net | |
| tun6-net.c | |
| int-master.c | |
| native-def.h | |
| rtimer-arch.c | Native (non-specific) code for the Contiki real-time module rt
|
| rtimer-arch.h | A brief description of what this file is. |
| watchdog.c | |
| ► nrf52832 | |
| ► ble | |
| ble-core.c | Basic BLE functions |
| ble-core.h | Basic BLE functions |
| ble-mac.c | A MAC protocol implementation that uses nRF52 IPSP implementation as a link layer |
| ble-mac.h | A MAC protocol implementation that uses nRF52 IPSP implementation as a link layer |
| ► dev | |
| clock.c | Software clock implementation for the nRF52 |
| lpm.h | A header file for low power mode functions |
| random.c | Random number generator routines exploiting the nRF52 hardware capabilities |
| uart0.c | Contiki compatible UART driver |
| uart0.h | A header file for Contiki compatible UART driver |
| watchdog.c | Contiki compatible watchdog driver implementation |
| dbg.c | Hardware specific implementation of putchar() and puts() functions |
| int-master.c | Master interrupt manipulation implementation for the nrf52832 |
| nrf52832-def.h | |
| rtimer-arch.c | Implementation of the architecture dependent rtimer functions for the nRF52 |
| rtimer-arch.h | Architecture dependent rtimer implementation header file |
| ► dev | |
| ► bme280 | |
| bme280-arch.h | |
| bme280-sensor.c | |
| bme280-sensor.h | |
| bme280.c | Basic functions for Bosch BME280 based on datasheet Rev 1.1
|
| bme280.h | Definitions for the Bosch BME280 based on datasheet Rev 1.1
|
| ► cc1200 | |
| cc1200-802154g-863-870-fsk-50kbps.c | |
| cc1200-868-fsk-1-2kbps.c | |
| cc1200-arch.h | |
| cc1200-conf.h | |
| cc1200-const.h | |
| cc1200-rf-cfg.h | |
| cc1200.c | |
| ► cc2420 | |
| cc2420.c | |
| cc2420.h | CC2420 driver header file
|
| cc2420_const.h | |
| ► disk | |
| ► mmc | |
| mmc-arch.h | Header file for the SD/MMC device driver architecture-specific definitions |
| mmc.c | Implementation of the SD/MMC device driver |
| mmc.h | Header file for the SD/MMC device driver |
| disk.h | Header file defining the disk device driver API |
| ► ds2411 | |
| ds2411.c | |
| ds2411.h | |
| ► enc28j60 | |
| enc28j60-ip64-driver.c | |
| enc28j60-ip64-driver.h | |
| enc28j60.c | |
| enc28j60.h | |
| ► ext-flash | |
| ext-flash.c | Implementation of a generic external SPI flash driver |
| ext-flash.h | Header file for the external SPI flash API |
| ► rgb-led | |
| rgb-led.c | Implementation of the RGB LED driver |
| rgb-led.h | Header file for the RGB LED driver |
| ► sht11 | |
| sht11-sensor.c | |
| sht11-sensor.h | |
| sht11.c | |
| sht11.h | |
| ► platform | |
| ► cc2538dk | |
| ► dev | |
| als-sensor.c | Driver for the SmartRF06EB ALS |
| als-sensor.h | Header file for the cc2538dk ALS Driver |
| board-buttons.c | Defines SmartRF06EB buttons for use with the button HAL |
| board.h | Header file with definitions related to the I/O connections on the TI SmartRF06EB |
| leds-arch.c | |
| smartrf-sensors.c | Implementation of a generic module controlling SmartRF06EB sensors |
| contiki-conf.h | Configuration for the cc2538dk platform |
| platform.c | Main module for the cc2538dk platform |
| ► cooja | |
| ► cfs | |
| cfs-cooja.c | |
| ► dev | |
| beep.c | |
| beep.h | |
| button-sensor.c | |
| button-sensor.h | |
| cooja-radio.c | |
| cooja-radio.h | |
| eeprom.c | |
| ip.c | |
| ip.h | |
| leds-arch.c | |
| moteid.c | |
| moteid.h | |
| pir-sensor.c | |
| pir-sensor.h | |
| rs232.c | |
| rs232.h | Header file for COOJA RS232 driver |
| vib-sensor.c | |
| vib-sensor.h | |
| watchdog.c | |
| ► lib | |
| simEnvChange.c | |
| simEnvChange.h | |
| ► net | |
| init-net.h | |
| uip-driver.c | A brief description of what this file is
|
| uip-driver.h | A brief description of what this file is
|
| ► sys | |
| clock.c | |
| cooja-log.c | |
| cooja_mt.c | |
| cooja_mt.h | |
| cooja_mtarch.c | |
| cooja_mtarch.h | |
| ► testapps | |
| hello-world.c | |
| testbutton.c | |
| testcfs.c | |
| testctimer.c | |
| testetimer.c | |
| testsensors.c | |
| testserial.c | |
| testuip.c | |
| contiki-conf.h | |
| mtarch.c | |
| mtarch.h | |
| platform.c | COOJA Contiki mote main file. |
| rtimer-arch.c | |
| rtimer-arch.h | |
| slip-arch.c | |
| ► jn516x | |
| ► dev | |
| ► dongle | |
| leds-arch.c | |
| ► dr1174 | |
| button-sensor.c | |
| button-sensor.h | |
| leds-arch.c | |
| ► dr1175 | |
| ht-sensor.c | |
| ht-sensor.h | |
| leds-arch-1175.c | |
| leds-arch-1175.h | |
| light-sensor.c | |
| light-sensor.h | |
| ► dr1199 | |
| leds-arch-1199.c | |
| leds-arch-1199.h | |
| pot-sensor.c | |
| pot-sensor.h | |
| clock.c | Tickless clock implementation for NXP jn516x. |
| exceptions.c | |
| exceptions.h | |
| jn516x-ccm-star.c | CCM* header implementation exploiting the JN516x
cryptographic co-processor
|
| leds-extension.c | |
| leds-extension.h | |
| micromac-radio.c | Contiki driver for NXP JN516X using MMAC interface
|
| micromac-radio.h | MICROMAC_RADIO driver header file
|
| rtimer-arch-slow.c | RTIMER for NXP jn516x: 32 kHz mode
|
| rtimer-arch.c | RTIMER for NXP jn516x
|
| rtimer-arch.h | Header file for NXP jn516x-specific rtimer code
|
| slip_uart0.c | |
| uart-driver.c | |
| uart-driver.h | |
| uart0.c | UART0 drivers
|
| uart0.h | UART0 drivers
|
| uart1.c | UART1 drivers
|
| uart1.h | UART1 drivers
|
| watchdog.c | JN516X watchdog support. |
| contiki-conf.h | |
| dbg.c | |
| int-master.c | Master interrupt manipulation implementation for the JN516x |
| jn516x-def.h | |
| platform.c | Contiki main for NXP JN516X platform |
| slip.c | Alternative implementation for SLIP:
|
| ► native | |
| ► dev | |
| buttons.c | |
| xmem.c | |
| cfs-coffee-arch.h | Coffee architecture-dependent header for the native platform. |
| cfs-posix-dir.c | |
| cfs-posix.c | |
| clock.c | Clock implementation for Unix. |
| contiki-conf.h | |
| platform.c | |
| ► nrf52dk | |
| ► config | |
| nrf_drv_config.h | |
| pstorage_platform.h | |
| ► dev | |
| button-sensor.c | Driver for nRF52 DK buttons |
| button-sensor.h | Header file for the nRF52dk button driver |
| leds-arch.c | Architecture specific LED driver implementation for nRF52 DK |
| nrf52dk-sensors.c | This file exports a global sensors table |
| temperature-sensor.c | Temperature sensor implementation |
| temperature-sensor.h | Temperature sensor header file |
| ► rtt | |
| rtt-printf.c | |
| segger-rtt-conf.h | |
| segger-rtt-printf.c | |
| segger-rtt.c | |
| segger-rtt.h | |
| contiki-conf.h | Contiki configuration for the nRF52 DK |
| nrf52dk-def.h | Platform features configuration |
| platform.c | |
| ► openmote-cc2538 | |
| ► dev | |
| adxl346.c | Driver for the ADXL346 acceleration sensor |
| adxl346.h | ADXL346 acceleration sensor driver header file |
| antenna.c | Driver implementation for the OpenMote-CC2538 antenna switch |
| antenna.h | Header for the OpenMote-CC2538 antenna switch |
| board-buttons.c | Defines the OpenMote-CC2538 user button for use with the button HAL |
| leds-arch.c | |
| max44009.c | Driver for the MAX44009 light sensor |
| max44009.h | Header file for the MAX44009 light sensor driver |
| openmote-sensors.c | Implementation of a generic module controlling OpenMote-CC2538 sensors |
| openmote-sensors.h | Implementation of a generic module controlling OpenMote-CC2538 sensors |
| sht21.c | Driver for the SHT21 temperature and relative humidity sensor |
| sht21.h | Header file for the SHT21 temperature and humidity sensor driver |
| tps62730.c | Driver for the TPS62730 voltage regulator |
| tps62730.h | Driver for the TPS62730 voltage regulator |
| board.c | Board-initialisation for the OpenMote-CC2538 platform |
| board.h | This file provides connectivity information on LEDs, Buttons, UART and other OpenMote-CC2538 peripherals |
| contiki-conf.h | Configuration for the OpenMote-CC2538 platform |
| platform.c | Main module for the OpenMote-CC2538 platform |
| ► sky | |
| ► apps | |
| blink.c | A quick program that blinks the LEDs
|
| fader.c | |
| ► dev | |
| battery-sensor.c | |
| button-sensor.c | |
| i2c.c | |
| i2c.h | |
| light-sensor.c | |
| light-sensor.h | |
| sht11-arch.h | Architecture-specific definitions for the SHT11 sensor on Tmote Sky. |
| sky-sensors.c | |
| sky-sensors.h | |
| temperature-sensor.c | Sensor driver for reading the built-in temperature sensor in the CPU. |
| temperature-sensor.h | Temperature sensor header file. |
| xmem.c | Device driver for the ST M25P80 40MHz 1Mbyte external memory. |
| cfs-coffee-arch.h | Coffee architecture-dependent header for the Tmote Sky platform. |
| contiki-conf.h | |
| contiki-sky-platform.c | |
| platform.c | |
| sky-def.h | A brief description of what this file is
|
| ► srf06-cc26xx | |
| ► common | |
| xmem.c | Device driver for the MX25R8035F 1Mbyte external memory. |
| ► launchpad | |
| ► cc1310 | |
| board.h | Header file with definitions related to the I/O connections on the TI CC1310 LaunchPad |
| ► cc1350 | |
| board.h | Header file with definitions related to the I/O connections on the TI CC1350 LaunchPad |
| rf-switch.c | CC1350 LP RF switch driver |
| tx-power-driver.c | TX power settings for the CC1350 LP |
| ► cc2650 | |
| board.h | Header file with definitions related to the I/O connections on the TI CC2650 LaunchPad |
| board-buttons.c | Defines CC13xx/CC26xx Launchpad buttons for use with the button HAL |
| board-peripherals.h | Header file with definitions related to LaunchPad peripherals |
| board.c | LaunchPad-specific board initialisation driver |
| leds-arch.c | |
| ► sensortag | |
| ► cc1350 | |
| board.h | Header file with definitions related to the I/O connections on the TI Sensortag |
| leds-arch.c | |
| ► cc2650 | |
| board.h | Header file with definitions related to the I/O connections on the TI Sensortag |
| leds-arch.c | |
| bmp-280-sensor.c | Driver for the Sensortag BMP280 Altimeter / Pressure Sensor |
| bmp-280-sensor.h | Header file for the Sensortag BMP280 Altimeter / Pressure Sensor |
| board-buttons.c | Defines Sensortag buttons for use with the button HAL |
| board-i2c.c | Board-specific I2C driver for the Sensortags |
| board-i2c.h | Header file for the Sensortag I2C Driver |
| board-peripherals.h | Header file with definitions related to the sensors on the Sensortags |
| board.c | Sensortag-specific board initialisation driver |
| buzzer.c | Driver for the Sensortag Buzzer |
| buzzer.h | Header file for the Sensortag Buzzer |
| hdc-1000-sensor.c | Driver for the Sensortag HDC sensor |
| hdc-1000-sensor.h | Header file for the Sensortag TI HDC1000 sensor |
| mpu-9250-sensor.c | Driver for the Sensortag Invensense MPU9250 motion processing unit |
| mpu-9250-sensor.h | Header file for the Sensortag Invensense MPU9250 motion processing unit |
| opt-3001-sensor.c | Driver for the Sensortag Opt3001 light sensor |
| opt-3001-sensor.h | Header file for the Sensortag Opt3001 light sensor |
| sensor-common.c | Utilities common among SensorTag sensors |
| sensor-common.h | Header file for the Sensortag Common sensor utilities |
| sensortag-sensors.c | Generic module controlling sensors on Sensortags |
| tmp-007-sensor.c | Driver for the Sensortag TI TMP007 infrared thermophile sensor |
| tmp-007-sensor.h | Header file for the Sensortag TI TMP007 infrared thermophile sensor |
| ► srf06 | |
| ► cc13xx | |
| board.h | Header file with definitions related to the I/O connections on the TI SmartRF06 Evaluation Board with a CC1310EM |
| ► cc26xx | |
| board.h | Header file with definitions related to the I/O connections on the TI SmartRF06 Evaluation Board with a CC26xxEM |
| als-sensor.c | Driver for the SmartRF06EB ALS when a CC13xx/CC26xxEM is mounted on it |
| als-sensor.h | Header file for the SmartRF06EB + CC13xx/CC26xxEM ALS Driver |
| board-buttons.c | Defines SmarfRF06 + CC13xxEM/CC26xxEM buttons for use with the button HAL |
| board-peripherals.h | |
| board.c | Board-initialisation for the Srf06EB with a CC13xx/CC26xx EM |
| leds-arch.c | |
| srf06-sensors.c | Generic module controlling sensors on the SmartRF06EB when a CC26xx is mounted on the board |
| cfs-coffee-arch.h | Coffee architecture-dependent header for the srf06-cc2650 sensortag platform. |
| contiki-conf.h | Configuration for the srf06-cc26xx platform |
| platform.c | |
| ► zoul | |
| ► dev | |
| ac-dimmer.c | Driver for the Krida Electronics AC light dimmer with zero-crossing, using a 50Hz frequency as reference (1/50Hz) ~20ms and 10ms half-cycle |
| ac-dimmer.h | Header file for an AC light dimmer with zero-crossing driver |
| adc-sensors.c | Generic driver for the Zoul ADC wrapper for analogue sensors |
| adc-sensors.h | Header file for the Zoul ADC sensors API |
| adc-zoul.c | Generic driver for the Zoul ADC interface |
| adc-zoul.h | Header file for the Zoul ADC interface |
| antenna-sw.c | Driver for the RE-Mote RF antenna switch |
| antenna-sw.h | Header file for the RE-Mote RF antenna switch |
| bme280-arch.c | Architecture-specific I2C for the external BME280 weather sensor |
| bmpx8x.c | Driver for the external BMP085/BMP180 atmospheric pressure sensor |
| bmpx8x.h | Header file for the external BMP085/BMP180 Sensor Driver |
| board-buttons.c | Defines the Zoul user button for use with the button HAL |
| cc1200-zoul-arch.c | CC1200 Zoul arch specifics |
| dht22.c | Driver for the DHT22 temperature and humidity sensor |
| dht22.h | Header file for the DHT22 temperature and humidity sensor |
| grove-gyro.c | Grove's 3-axis gyroscope driver |
| grove-gyro.h | Grove 3-axis gyroscope header file |
| iaq.c | Driver for the RE-Mote RF IAQ iAQ-Core sensor (IAQ) |
| iaq.h | Header file for the RE-Mote Sensor IAQ |
| led-strip.c | Driver for a bright LED strip |
| led-strip.h | Header file for a bright LED strip driver |
| leds-arch.c | |
| mmc-arch.c | Implementation of the SD/MMC device driver RE-Mote-specific definitions |
| motion-sensor.c | Digital motion sensor driver |
| motion-sensor.h | Digital motion sensor header file |
| mp3-wtv020sd.c | Header file for the MP3 WTV020SD driver |
| mp3-wtv020sd.h | Header file for the MP3 WTV020SD driver |
| pm10-sensor.c | GP2Y1010AU0F PM10 sensor example using the ADC sensors wrapper |
| pm10-sensor.h | GP2Y1010AU0F PM10 sensor driver |
| relay.c | Driver for a relay actuator |
| relay.h | Header file for the generic relay driver |
| rgb-bl-lcd.c | Grove LCD with RGB backlight driver |
| rgb-bl-lcd.h | Grove LCD with RGB backlight header |
| rtcc-config.h | RTCC configuration file |
| rtcc.c | Driver for the RE-Mote RF Real Time Clock Calendar (RTCC) |
| rtcc.h | Header file for the RE-Mote RF antenna switch |
| servo.c | Driver for a generic Servo driver |
| servo.h | Header file for a Generic Servo driver |
| sht25.c | SHT25 temperature and humidity sensor driver |
| sht25.h | SHT25 temperature and humidity sensor driver header file |
| tmp102.c | Driver for the TMP102 temperature sensor |
| tmp102.h | Header file for the TMP102 Sensor Driver |
| tsl256x.c | Driver for the external TSL256X light sensor |
| tsl256x.h | Header file for the external TSL256X Sensor Driver |
| weather-meter.c | Weather meter sensor driver |
| weather-meter.h | Weather meter header file |
| zonik.c | Driver for the RE-Mote Zonik sound sensor (ZONIK) |
| zonik.h | Header file for the Zolertia Zonik sound sensor |
| zoul-sensors.c | Implementation of a generic module controlling Zoul sensors |
| zoul-sensors.h | Implementation of a generic module controlling Zoul sensors |
| ► firefly | |
| board.c | Board-initialisation for the Zolertia's Firefly platform |
| board.h | Header file with definitions related to the I/O connections on the Zolertia's Firefly platform, Zoul-based |
| ► firefly-reva | |
| board.c | Board-initialisation for the Zolertia's Firefly platform |
| board.h | Header file with definitions related to the I/O connections on the Zolertia's Firefly platform, Zoul-based |
| ► fs | |
| ► fat | |
| diskio.c | Implementation of the default port of FatFs on RE-Mote |
| ffconf.h | Header file configuring FatFs for RE-Mote |
| ► orion | |
| board.c | Board-initialisation for the Zolertia Orion Ethernet Router |
| board.h | Header file with definitions related to the I/O connections on the Zolertia's Orion Ethernet Router, Zoul-based |
| enc28j60-arch-gpio.c | Eth-gw GPIO arch specifics |
| enc28j60-arch-spi.c | Eth-gw SPI arch specifics |
| ip64-conf.h | |
| ► remote-reva | |
| board.c | Board-initialisation for the Zolertia's RE-Mote revision A platform |
| board.h | Header file with definitions related to the I/O connections on the Zolertia's RE-Mote platform (revision A), cc2538-based |
| power-mgmt.c | |
| power-mgmt.h | Header file for the RE-Mote Power Management driver |
| ► remote-revb | |
| board.c | Board-initialisation for the Zolertia's RE-Mote revision B platform |
| board.h | Header file with definitions related to the I/O connections on the Zolertia's RE-Mote platform (revision B), cc2538-based |
| power-mgmt.c | |
| power-mgmt.h | Header file for the RE-Mote Power Management driver |
| contiki-conf.h | Configuration for the Zoul-based platforms |
| platform.c | Main module for the Zolertia Zoul core and based platforms |
| ▼ os | |
| ► dev | |
| battery-sensor.h | |
| ble-hal.h | Hardware abstraction for a BLE controller |
| button-hal.c | Platform-independent button driver |
| button-hal.h | Header file for the button HAL |
| button-sensor.h | |
| eeprom.h | EEPROM functions |
| gpio-hal.c | Implementation of the platform-independent aspects of the GPIO HAL |
| gpio-hal.h | Header file for the GPIO HAL |
| leds.c | Implementation of the platform-independent aspects of the LED HAL |
| leds.h | Header file for the LED HAL |
| nullradio.c | |
| nullradio.h | |
| radio.h | Header file for the radio API
|
| rom.h | |
| serial-line.c | |
| serial-line.h | Generic serial I/O process header filer |
| slip.c | |
| slip.h | |
| spi-legacy.h | Basic SPI macros
|
| spi.c | Implementation of the platform-independent aspects of the SPI HAL |
| spi.h | Header file for the SPI HAL |
| watchdog.h | |
| xmem.h | |
| ► lib | |
| ► dbg-io | |
| dbg.h | Header file for the dbg-io module |
| printf.c | |
| putchar.c | |
| puts.c | |
| snprintf.c | |
| sprintf.c | |
| strformat.c | |
| strformat.h | |
| ► fs | |
| ► fat | |
| ► option | |
| ► unicode | |
| cc932.c | |
| cc936.c | |
| cc949.c | |
| cc950.c | |
| ccsbcs.c | |
| syscall.c | |
| unicode.c | |
| diskio.h | |
| ff.c | |
| ff.h | |
| integer.h | |
| ► json | |
| json.h | A few JSON defines used for parsing and generating JSON. |
| jsonparse.c | |
| jsonparse.h | |
| jsontree.c | JSON output generation
|
| jsontree.h | JSON output generation
|
| ► newlib | |
| syscalls.c | System calls |
| ► strncasecmp | |
| strncasecmp.c | |
| aes-128.c | Wrapped AES-128 implementation from Texas Instruments. |
| aes-128.h | AES-128. |
| assert.c | |
| assert.h | |
| ccm-star.c | AES_128-based CCM* implementation. |
| ccm-star.h | CCM* header file. |
| circular-list.c | Implementation of circular singly linked lists |
| circular-list.h | |
| crc16.c | Implementation of the CRC16 calculcation
|
| crc16.h | Header file for the CRC16 calculcation
|
| dbl-circ-list.c | Implementation of circular, doubly-linked lists |
| dbl-circ-list.h | |
| dbl-list.c | Implementation of doubly-linked lists |
| dbl-list.h | |
| heapmem.c | Dynamic memory allocation module. |
| heapmem.h | Header file for the dynamic heap memory allocator. |
| ifft.c | |
| ifft.h | |
| list.c | Linked list library implementation |
| list.h | Linked list manipulation routines |
| memb.c | Memory block allocation routines |
| memb.h | Memory block allocation routines. |
| queue.h | |
| random.c | |
| random.h | |
| ringbuf.c | Ring buffer library implementation
|
| ringbuf.h | Header file for the ring buffer library
|
| ringbufindex.c | ringbufindex library. |
| ringbufindex.h | Header file for the ringbufindex library
|
| sensors.c | |
| sensors.h | |
| stack.h | |
| trickle-timer.c | Trickle timer library implementation |
| trickle-timer.h | Trickle timer library header file |
| ► net | |
| ► app-layer | |
| ► coap | |
| ► tinydtls-support | |
| dtls-support-conf.h | DTLS support for CoAP
|
| dtls-support.c | DTLS support for CoAP
|
| coap-block1.c | CoAP module for block 1 handling
|
| coap-block1.h | CoAP module for block 1 handling
|
| coap-blocking-api.c | CoAP implementation for the REST Engine. |
| coap-blocking-api.h | |
| coap-callback-api.c | Callback API for doing CoAP requests
Adapted from the blocking API
|
| coap-callback-api.h | Callback API for doing CoAP requests
Adapted from the blocking API
|
| coap-conf.h | Collection of default configuration values. |
| coap-constants.h | Collection of constants specified in the CoAP standard. |
| coap-endpoint.h | API to address CoAP endpoints
|
| coap-engine.c | CoAP implementation Engine. |
| coap-engine.h | CoAP engine implementation. |
| coap-keystore-simple.c | A simple keystore with fixed credentials. |
| coap-keystore-simple.h | A simple keystore with fixed credentials. |
| coap-keystore.h | API for CoAP keystore
|
| coap-log.c | Log support for CoAP
|
| coap-log.h | Log support for CoAP
|
| coap-observe-client.c | |
| coap-observe-client.h | |
| coap-observe.c | CoAP module for observing resources (draft-ietf-core-observe-11). |
| coap-observe.h | CoAP module for observing resources (draft-ietf-core-observe-11). |
| coap-res-well-known-core.c | /.well-known/core resource implementation. |
| coap-separate.c | CoAP module for separate responses. |
| coap-separate.h | CoAP module for separate responses. |
| coap-timer-default.c | CoAP timer driver implementation based on Contiki etimers
|
| coap-timer.c | CoAP timer implementation. |
| coap-timer.h | CoAP timer API. |
| coap-transactions.c | CoAP module for reliable transport
|
| coap-transactions.h | CoAP module for reliable transport
|
| coap-transport.h | API for CoAP transport
|
| coap-uip.c | CoAP transport implementation for uIPv6
|
| coap.c | An implementation of the Constrained Application Protocol (RFC). |
| coap.h | An implementation of the Constrained Application Protocol (RFC 7252). |
| module-macros.h | |
| ► http-socket | |
| http-socket.c | |
| http-socket.h | |
| websocket-http-client.c | |
| websocket-http-client.h | |
| websocket.c | |
| websocket.h | |
| ► httpd-ws | |
| httpd-ws.c | A simple webserver for web services
|
| httpd-ws.h | A simple webserver for web services
|
| ► mqtt | |
| mqtt.c | Implementation of the Contiki MQTT engine |
| mqtt.h | Header file for the Contiki MQTT engine |
| ► ipv6 | |
| ► multicast | |
| esmrf.c | This file shows the implementations of the Enhanced Stateless
Multicast RPL Forwarding (ESMRF) |
| esmrf.h | Header file for the Enhanced Stateless Multicast RPL Forwarding (ESMRF) |
| roll-tm.c | Implementation of the ROLL TM multicast engine |
| roll-tm.h | Header file for the implementation of the ROLL-TM multicast engine |
| smrf.c | This file implements 'Stateless Multicast RPL Forwarding' (SMRF) |
| smrf.h | Header file for the SMRF forwarding engine |
| uip-mcast6-engines.h | Header file with definition of multicast engine constants |
| uip-mcast6-route.c | Multicast routing table manipulation |
| uip-mcast6-route.h | Header file for multicast routing table manipulation |
| uip-mcast6-stats.c | IPv6 multicast forwarding stats maintenance |
| uip-mcast6-stats.h | Header file for IPv6 multicast forwarding stats maintenance |
| uip-mcast6.h | This header file contains configuration directives for uIPv6 multicast support |
| ip64-addr.c | |
| ip64-addr.h | |
| psock.c | |
| psock.h | Protosocket library header file |
| resolv.c | DNS host name to IP address resolver. |
| resolv.h | UIP DNS resolver code header file |
| sicslowpan.c | 6lowpan implementation (RFC4944 and draft-ietf-6lowpan-hc-06) |
| sicslowpan.h | Header file for the 6lowpan implementation
(RFC4944 and draft-hui-6lowpan-hc-01)
|
| simple-udp.c | Code for the simple-udp module. |
| simple-udp.h | Header file for the simple-udp module. |
| tcp-socket.c | |
| tcp-socket.h | |
| tcpip.c | Core of the TCP/IP stack, handles input/output/routing |
| tcpip.h | Header for the Contiki/uIP interface. |
| udp-socket.c | |
| udp-socket.h | |
| uip-arch.h | Declarations of architecture specific functions |
| uip-debug.h | A set of debugging macros for the IP stack |
| uip-ds6-nbr.c | IPv6 Neighbor cache (link-layer/IPv6 address mapping) |
| uip-ds6-nbr.h | IPv6 Neighbor cache (link-layer/IPv6 address mapping) |
| uip-ds6-route.c | Routing table manipulation |
| uip-ds6-route.h | Header file for routing table manipulation |
| uip-ds6.c | IPv6 data structure manipulation |
| uip-ds6.h | Header file for IPv6-related data structures |
| uip-icmp6.c | ICMPv6 (RFC 4443) implementation, with message and error handling |
| uip-icmp6.h | Header file for ICMPv6 message and error handing (RFC 4443) |
| uip-nameserver.c | uIP Name Server interface
|
| uip-nameserver.h | uIP Name Server interface
|
| uip-nd6.c | Neighbor discovery (RFC 4861) |
| uip-nd6.h | Header file for IPv6 Neighbor discovery (RFC 4861) |
| uip-packetqueue.c | |
| uip-packetqueue.h | |
| uip-sr.c | Source routing support |
| uip-sr.h | Source routing support |
| uip-udp-packet.c | Module for sending UDP packets through uIP. |
| uip-udp-packet.h | Header file for module for sending UDP packets through uIP. |
| uip.h | Header file for the uIP TCP/IP stack |
| uip6.c | The uIP TCP/IPv6 stack code |
| uipbuf.c | |
| uipbuf.h | |
| uiplib.c | Implementation of the IP address manipulation library |
| uiplib.h | Header file for the IP address manipulation library |
| uipopt.h | Configuration options for uIP |
| ► mac | |
| ► ble | |
| ble-l2cap.c | MAC layer that implements BLE L2CAP credit-based flow control channels to support IPv6 over BLE (RFC 7668) |
| ble-l2cap.h | MAC layer that implements BLE L2CAP credit-based flow control channels to support IPv6 over BLE (RFC 7668) |
| ► csma | |
| csma-output.c | The 802.15.4 standard CSMA protocol (nonbeacon-enabled). |
| csma-output.h | The 802.15.4 standard CSMA protocol (nonbeacon-enabled). |
| csma.c | The 802.15.4 standard CSMA protocol (nonbeacon-enabled)
|
| csma.h | The 802.15.4 standard CSMA protocol (nonbeacon-enabled)
|
| ► framer | |
| frame802154.c | 802.15.4 frame creation and parsing functions |
| frame802154.h | 802.15.4 frame creation and parsing functions |
| frame802154e-ie.c | IEEE 802.15.4e Information Element (IE) creation and parsing. |
| frame802154e-ie.h | IEEE 802.15.4e Information Element (IE) creation and parsing. |
| framer-802154.c | MAC framer for IEEE 802.15.4
|
| framer-802154.h | A MAC framer for IEEE 802.15.4
|
| framer.h | A MAC framer is responsible for constructing and parsing
the header in MAC frames. |
| nullframer.c | MAC framer that does nothing... |
| ► nullmac | |
| nullmac.c | A MAC protocol that does not do anything. |
| nullmac.h | A MAC protocol implementation that does not do anything. |
| ► tsch | |
| ► sixtop | |
| sixp-nbr.c | Neighbor Management for 6top Protocol (6P)
|
| sixp-nbr.h | Neighbor Management APIs for 6top Protocol (6P)
|
| sixp-pkt.c | 6top Protocol (6P) Packet Manipulation
|
| sixp-pkt.h | 6top Protocol (6P) Packet Manipulation APIs
|
| sixp-trans.c | Transaction Management for 6top Protocol (6P)
|
| sixp-trans.h | Transaction Management APIs for 6top Protocol (6P)
|
| sixp.c | 6top Protocol (6P)
|
| sixp.h | 6top Protocol (6P) APIs
|
| sixtop-conf.h | 6top Configuration
|
| sixtop.c | 6TiSCH Operation Sublayer (6top) |
| sixtop.h | 6TiSCH Operation Sublayer (6top) APIs
|
| tsch-adaptive-timesync.c | TSCH adaptive time synchronization
|
| tsch-adaptive-timesync.h | TSCH adaptive time synchronization |
| tsch-asn.h | TSCH 5-Byte Absolute Slot Number (ASN) management |
| tsch-conf.h | TSCH configuration |
| tsch-const.h | TSCH constants |
| tsch-log.c | Log functions for TSCH, meant for logging from interrupt
during a timeslot operation. |
| tsch-log.h | TSCH per-slot logging |
| tsch-packet.c | TSCH packet format management
|
| tsch-packet.h | TSCH packet parsing and creation |
| tsch-queue.c | Per-neighbor packet queues for TSCH MAC. |
| tsch-queue.h | TSCH queues |
| tsch-rpl.c | Interaction between TSCH and RPL |
| tsch-rpl.h | TSCH-RPL interaction |
| tsch-schedule.c | IEEE 802.15.4 TSCH MAC schedule manager. |
| tsch-schedule.h | TSCH scheduling engine |
| tsch-security.c | TSCH security
|
| tsch-security.h | TSCH security |
| tsch-slot-operation.c | TSCH slot operation implementation, running from interrupt. |
| tsch-slot-operation.h | TSCH runtime operation within timeslots |
| tsch-types.h | TSCH types |
| tsch.c | IEEE 802.15.4 TSCH MAC implementation. |
| tsch.h | Main API declarations for TSCH |
| llsec802154.h | Common functionality of 802.15.4-compliant llsec_drivers. |
| mac-sequence.c | MAC sequence numbers management
|
| mac-sequence.h | Header file for MAC sequence numbers management
|
| mac.c | |
| mac.h | MAC driver header file
|
| ► nullnet | |
| nullnet.c | NullNet, a minimal network layer. |
| nullnet.h | NullNet, a minimal network layer. |
| ► routing | |
| ► nullrouting | |
| nullrouting.c | A routing protocol that does nothing |
| ► rpl-classic | |
| rpl-conf.h | |
| rpl-dag-root.c | |
| rpl-dag-root.h | |
| rpl-dag.c | Logic for Directed Acyclic Graphs in RPL. |
| rpl-ext-header.c | Management of extension headers for ContikiRPL. |
| rpl-icmp6.c | ICMP6 I/O for RPL control messages. |
| rpl-mrhof.c | The Minimum Rank with Hysteresis Objective Function (MRHOF), RFC6719 |
| rpl-nbr-policy.c | Default RPL NBR policy decides when to add a new discovered node to the nbr table from RPL |
| rpl-of0.c | An implementation of RPL's objective function 0, RFC6552 |
| rpl-private.h | |
| rpl-timers.c | RPL timer management. |
| rpl.c | ContikiRPL, an implementation of RPL: IPv6 Routing Protocol
for Low-Power and Lossy Networks (IETF RFC 6550) |
| rpl.h | |
| ► rpl-lite | |
| rpl-conf.h | Public configuration and API declarations for ContikiRPL |
| rpl-const.h | Constants for RPL |
| rpl-dag-root.c | DAG root utility functions for RPL |
| rpl-dag-root.h | DAG root utility functions for RPL |
| rpl-dag.c | Logic for Directed Acyclic Graphs in RPL |
| rpl-dag.h | Header file for rpl-dag module |
| rpl-ext-header.c | Management of extension headers for ContikiRPL |
| rpl-ext-header.h | Header file for rpl-ext-header |
| rpl-icmp6.c | ICMP6 I/O for RPL control messages |
| rpl-icmp6.h | Header file for rpl-ext-header |
| rpl-mrhof.c | The Minimum Rank with Hysteresis Objective Function (MRHOF), RFC6719 |
| rpl-nbr-policy.c | Default RPL NBR policy decides when to add a new discovered node to the nbr table from RPL |
| rpl-neighbor.c | Logic for DAG neighbors in RPL |
| rpl-neighbor.h | Header file for rpl-neighbor module |
| rpl-of0.c | An implementation of RPL's objective function 0, RFC6552 |
| rpl-timers.c | RPL timer management |
| rpl-timers.h | Header file for rpl-timers module |
| rpl-types.h | RPL types and macros |
| rpl.c | ContikiRPL, an implementation of RPL: IPv6 Routing Protocol for Low-Power and Lossy Networks (IETF RFC 6550) |
| rpl.h | |
| routing.h | Routing driver header file
|
| link-stats.c | |
| link-stats.h | |
| linkaddr.c | Functions for manipulating link-layer addresses
|
| linkaddr.h | Header file for the link-layer address representation
|
| nbr-table.c | |
| nbr-table.h | |
| net-debug.c | A set of debugging tools for the IP stack
|
| net-debug.h | A set of debugging macros for the netstack |
| netstack.c | Initialiation file for the Contiki low-layer network stack (NETSTACK)
|
| netstack.h | Include file for the Contiki low-layer network stack (NETSTACK)
|
| packetbuf.c | Packet buffer (packetbuf) management
|
| packetbuf.h | Header file for the Packet buffer (packetbuf) management
|
| queuebuf.c | Implementation of the Packet queue buffers
|
| queuebuf.h | Header file for the Packet queue buffer management
|
| ► services | |
| ► at-master | |
| at-master.c | |
| at-master.h | |
| ► ip64 | |
| ip64-addrmap.c | |
| ip64-addrmap.h | |
| ip64-arp.c | |
| ip64-arp.h | |
| ip64-conf-example.h | |
| ip64-dhcpc.c | |
| ip64-dhcpc.h | |
| ip64-dns64.c | |
| ip64-dns64.h | |
| ip64-driver.h | |
| ip64-eth-interface.c | |
| ip64-eth-interface.h | |
| ip64-eth.c | |
| ip64-eth.h | |
| ip64-interface.h | |
| ip64-ipv4-dhcp.c | |
| ip64-ipv4-dhcp.h | |
| ip64-null-driver.c | |
| ip64-null-driver.h | |
| ip64-slip-interface.c | |
| ip64-slip-interface.h | |
| ip64-special-ports.c | |
| ip64-special-ports.h | |
| ip64.c | |
| ip64.h | |
| ► ipso-objects | |
| ipso-blockwise-test.c | |
| ipso-button.c | Implementation of OMA LWM2M / IPSO button as a digital input
NOTE: only works with a Contiki Button Sensor (not for Standalone)
|
| ipso-control-template.c | Implementation of OMA LWM2M / IPSO control template. |
| ipso-control-template.h | Implementation of OMA LWM2M / IPSO sensor template. |
| ipso-leds-control.c | Implementation of OMA LWM2M / IPSO Light Control for LEDs
|
| ipso-light-control.c | Implementation of OMA LWM2M / IPSO Light Control
|
| ipso-objects.c | Implementation of the IPSO Objects
|
| ipso-objects.h | Header file for the Contiki IPSO Objects for OMA LWM2M
|
| ipso-sensor-template.c | Implementation of OMA LWM2M / IPSO sensor template. |
| ipso-sensor-template.h | Implementation of OMA LWM2M / IPSO sensor template. |
| ipso-temperature.c | Implementation of OMA LWM2M / IPSO Temperature
|
| ► lwm2m | |
| lwm2m-device.c | Implementation of the Contiki OMA LWM2M device
|
| lwm2m-device.h | Header file for the Contiki OMA LWM2M device
|
| lwm2m-engine.c | Implementation of the Contiki OMA LWM2M engine
|
| lwm2m-engine.h | Header file for the Contiki OMA LWM2M engine
|
| lwm2m-firmware.c | |
| lwm2m-firmware.h | |
| lwm2m-json.c | Implementation of the Contiki OMA LWM2M JSON writer
|
| lwm2m-json.h | Header file for the Contiki OMA LWM2M JSON writer
|
| lwm2m-notification-queue.c | Implementation of functions to manage the queue to store notifications
when waiting for the response to the update message in Queue Mode. |
| lwm2m-notification-queue.h | Header file for functions to manage the queue to store notifications
when waiting for the response to the update message in Queue Mode. |
| lwm2m-object.h | Header file for the LWM2M object API
|
| lwm2m-plain-text.c | Implementation of the Contiki OMA LWM2M plain text reader / writer
|
| lwm2m-plain-text.h | Header file for the Contiki OMA LWM2M plain text reader / writer
|
| lwm2m-queue-mode-conf.h | Queue Mode Configuration Parameters
|
| lwm2m-queue-mode-object.c | Implementation of the Contiki OMA LWM2M Queue Mode object
to manage the parameters from the server side
|
| lwm2m-queue-mode-object.h | Header file for the Contiki OMA LWM2M Queue Mode object
to manage the parameters from the server side
|
| lwm2m-queue-mode.c | Implementation of the Contiki OMA LWM2M Queue Mode for managing the parameters
|
| lwm2m-queue-mode.h | Header file for the Contiki OMA LWM2M Queue Mode implementation
to manage the parameters
|
| lwm2m-rd-client.c | Implementation of the Contiki OMA LWM2M engine
Registration and bootstrap client
|
| lwm2m-rd-client.h | Header file for the Contiki OMA LWM2M Registration and Bootstrap
Client. |
| lwm2m-security.c | Implementation of the Contiki OMA LWM2M security
|
| lwm2m-security.h | |
| lwm2m-server.c | Implementation of the Contiki OMA LWM2M server
|
| lwm2m-server.h | |
| lwm2m-tlv-reader.c | Implementation of the Contiki OMA LWM2M TLV reader
|
| lwm2m-tlv-reader.h | Header file for the Contiki OMA LWM2M TLV reader
|
| lwm2m-tlv-writer.c | Implementation of the Contiki OMA LWM2M TLV writer
|
| lwm2m-tlv-writer.h | Header file for the Contiki OMA LWM2M TLV writer
|
| lwm2m-tlv.c | Implementation of the Contiki OMA LWM2M TLV
|
| lwm2m-tlv.h | Header file for the Contiki OMA LWM2M TLV
|
| ► orchestra | |
| orchestra-conf.h | Orchestra configuration |
| orchestra-rule-default-common.c | Orchestra: a slotframe with a single shared link, common to all nodes
in the network, used for unicast and broadcast. |
| orchestra-rule-eb-per-time-source.c | Orchestra: a slotframe dedicated to transmission of EBs. |
| orchestra-rule-unicast-per-neighbor-rpl-ns.c | Orchestra: a slotframe dedicated to unicast data transmission. |
| orchestra-rule-unicast-per-neighbor-rpl-storing.c | Orchestra: a slotframe dedicated to unicast data transmission. |
| orchestra.c | Orchestra: an autonomous scheduler for TSCH exploiting RPL state. |
| orchestra.h | Orchestra header file |
| ► rpl-border-router | |
| ► embedded | |
| border-router-embedded.c | border-router
|
| slip-bridge.c | Slip fallback interface
|
| ► native | |
| border-router-cmds.c | Sets up some commands for the border router
|
| border-router-cmds.h | Sets up some commands for the border router
|
| border-router-mac.c | A null RDC implementation that uses framer for headers and sends
the packets over slip instead of radio. |
| border-router-native.c | border-router
|
| border-router.h | Border router header file
|
| module-macros.h | |
| slip-config.c | Slip configuration
|
| slip-dev.c | |
| tun-bridge.c | |
| module-macros.h | |
| rpl-border-router.c | |
| rpl-border-router.h | |
| ► shell | |
| serial-shell.c | A shell back-end for the serial port
|
| serial-shell.h | A shell back-end for the serial port
|
| shell-commands.c | The Contiki shell commands
|
| shell-commands.h | Main header file for the Contiki shell
|
| shell.c | The shell application
|
| shell.h | Main header file for the Contiki shell
|
| ► simple-energest | |
| module-macros.h | |
| simple-energest.c | A process that periodically prints out the time spent in
radio tx, radio rx, total time and duty cycle. |
| simple-energest.h | A process that periodically prints out the time spent in
radio tx, radio rx, total time and duty cycle. |
| ► slip-cmd | |
| cmd.c | A brief description of what this file is
|
| cmd.h | Simple command handler
|
| packetutils.c | |
| packetutils.h | |
| ► unit-test | |
| example-test.c | A test program for the unit test library. |
| unit-test.c | A tool for unit testing Contiki software. |
| unit-test.h | A tool for unit testing Contiki software. |
| ► storage | |
| ► antelope | |
| antelope.c | Main functions for Antelope, a DBMS for sensor devices. |
| antelope.h | Declarations of the main Antelope functions. |
| aql-adt.c | Utilities for building the internal representation of an AQL command. |
| aql-exec.c | Query execution functions for AQL. |
| aql-lexer.c | Lexical analyzer for AQL, the Antelope Query Language. |
| aql-parser.c | A recursive parser for AQL, the Antelope Query Language. |
| aql.h | Definitions and declarations for AQL, the Antelope Query Language. |
| attribute.h | Definitions for attributes. |
| db-options.h | Database configuration options. |
| db-types.h | .
|
| debug.h | A set of debugging macros. |
| index-inline.c | A binary search index for attributes that are constrained to be
monotonically increasing, which is a rather common pattern for
time series or keys. |
| index-maxheap.c | MaxHeap - A binary maximum heap index for flash memory. |
| index-memhash.c | A memory-resident hash map used as a DB index. |
| index.c | This component forwards index calls using the generic index
API to specific implementations. |
| index.h | .
|
| lvm.c | Logic engine used for quickly evaluating data constraints in relations. |
| lvm.h | Definitions and declarations for the Propositional Logic Engine. |
| relation.c | Logic for relational databases. |
| relation.h | .
|
| result.c | Result acquisition interface for AQL queries. |
| result.h | Declarations for the result acquisition API. |
| storage-cfs.c | Contiki File System (CFS) backend for the storage abstraction
used by the database. |
| storage.h | The storage interface used by the database. |
| ► cfs | |
| cfs-coffee.c | Coffee: A file system for a variety of storage types in
memory-constrained devices. |
| cfs-coffee.h | Header for the Coffee file system. |
| cfs.h | CFS header file. |
| ► sys | |
| autostart.c | Implementation of module for automatically starting and exiting a list of processes. |
| autostart.h | Header file for module for automatically starting and exiting a list of processes. |
| cc-gcc.h | |
| cc.h | Default definitions of C compiler quirk work-arounds |
| clock.h | |
| compower.c | Communication power accounting module
|
| compower.h | Header file for the communication power accounting module
|
| critical.h | |
| ctimer.c | Callback timer implementation
|
| ctimer.h | Header file for the callback timer
|
| energest.c | Implementation of the energy estimation module
|
| energest.h | Header file for the energy estimation mechanism
|
| etimer.c | Event timer library implementation |
| etimer.h | Event timer header file |
| int-master.h | |
| lc-addrlabels.h | Implementation of local continuations based on the "Labels as
values" feature of gcc |
| lc-switch.h | Implementation of local continuations based on switch() statement |
| lc.h | Local continuations |
| log-conf.h | Default log levels for a number of modules
|
| log.c | Header file for the logging system
|
| log.h | Header file for the logging system
|
| memory-barrier.h | |
| mutex.c | |
| mutex.h | |
| node-id.c | Node-id management
|
| node-id.h | Node-id (simple 16-bit identifiers) handling |
| platform.h | Header file for the Contiki-NG main routine |
| process.c | Implementation of the Contiki process kernel. |
| process.h | Header file for the Contiki process interface |
| pt-sem.h | Counting semaphores implemented on protothreads |
| pt.h | Protothreads implementation |
| rtimer.c | Implementation of the architecture-agnostic parts of the real-time timer module. |
| rtimer.h | Header file for the real-time timer module. |
| stack-check.c | Implementation of the stack checker library. |
| stack-check.h | Stack checker library header file. |
| stimer.c | Timer of seconds library implementation |
| stimer.h | Second timer library header file |
| subprocess.h | Subprocesses for Contiki
|
| timer.c | Timer library implementation |
| timer.h | Timer library header file |
| contiki-default-conf.h | |
| contiki-lib.h | |
| contiki-main.c | Implementation of Contiki-NG's main routine |
| contiki-net.h | |
| contiki.h | |
